Pedrollo Centrifugal Pump, 1/2 HP, 3 Phase, 220/440 Volt, Model CP 600.

The CP 600, is a 1/2 hp, Pedrollo centrifugal pump. It is an amazing pump used in a variety of industrial and civil fields that require a small pump with great production. It has a flow rate up to 18 GPM and a maximum head of 65 ft.

Specifics

• 1/2 hp
• 220/440 Volt
• 3 Phase
• 60 hz

  Performance Range

  • Flow rate up to 18 gpm
  • Head up to 65 ft (28 PSI)

  Use

  • They are recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made.
  • Reliable and maintenance free, they are widely used in the domestic and civil sector. In particular, for water distribution in combination with small or medium pressure sets, for transfer in general, or for irrigation.
  • The pumps must be installed in enclosed places, or at least protected against inclement weather.

  Construction

  • SUCTION: 1”
  • DISCHARGE: 1”
  • PUMP BODY: Cast iron with threaded ports.
  • BRASS IMPELLER
  • MOTOR SHAFT: Stainless steel.
  • MECHANICAL SEAL: Ceramic and graphite.
  • MOTOR: The pumps are coupled to a high efficiency Pedrollo induction motor of suitable size, which is quiet, closed and externally ventilated, suitable for continuous duty.

  Limits Of Use

  • Manometric suction lift up to 23 ft
  • Liquid temperature up to + 194°F
  • Environment temperature up to + 104°F

  Shipping Policy Return Policy

Weight 16