Pedrollo Centrifugal Pump, 1.5 HP, Single Phase, 230 Volt (CPm 190)

The CP-15C16S is a 1.5 hp, 230 volt, single phase, 60 Hz Pedrollo centrifugal pump. It has a flow rate up to 42 GPM and a maximum head of 141 ft. The pump is coupled to a TEFC high efficiency Pedrollo Motor.

Specifics

• 1.5 hp
• 230 Volt
• Single Phase
• 60 hz

  Performance Range

  • Flow rate up to 42 gpm
  • Head up to 141 ft

  Use

  • They are recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made.
  • Reliable and maintenance free, they are widely used in the domestic and civil sector. In particular, for water distribution in combination with small or medium pressure sets, for transfer in general, or for irrigation.
  • The pumps must be installed in enclosed places, or at least protected against inclement weather.

  Construction

  • SUCTION AND DISCHARGE: 1.25” x 1”
  • PUMP BODY: Cast iron with threaded ports.
  • BRASS IMPELLER
  • MOTOR SHAFT: Stainless steel.
  • MECHANICAL SEAL: Ceramic and graphite.
  • MOTOR: The pumps are coupled to a high efficiency Pedrollo induction motor of suitable size, which is quiet, closed and externally ventilated, suitable for continuous duty.
  • The thermal cutout relay (motor protector) is incorporated in single phase motors.

  Limits Of Use

  • Manometric suction lift up to 23 ft
  • Liquid temperature up to + 194°F
  • Environment temperature up to + 104°F

  Shipping Policy Return Policy

Weight 43