Pedrollo Centrifugal Pump, 2 HP, 3 Phase, 230/460 Volt

The CP-20H36S is a 2 hp, 230-460 volt, three phase, 60 Hz Pedrollo centrifugal pump. It has a flow rate up to 42 GPM and a maximum head up to 168 ft. The pump is coupled to a TEFC high efficiency Pedrollo Motor.

Specifics

• 2 hp
• 230/460 Volt
• Three Phase
• 60 hz

  Performance Range

  • Flow rate up to 42 gpm
  • Head up to 168 ft

  Use

  • They are recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made.
  • Reliable and maintenance free, they are widely used in the domestic and civil sector. In particular, for water distribution in combination with small or medium pressure sets, for transfer in general, or for irrigation.
  • The pumps must be installed in enclosed places, or at least protected against inclement weather.

  Construction

  • SUCTION AND DISCHARGE: 1.25” x 1”
  • PUMP BODY: Cast iron with threaded ports.
  • BRASS IMPELLER
  • MOTOR SHAFT: Stainless steel.
  • MECHANICAL SEAL: Ceramic and graphite.
  • MOTOR: The pumps are coupled to a high efficiency Pedrollo induction motor of suitable size, which is quiet, closed and externally ventilated, suitable for continuous duty.

  Limits Of Use

  • Manometric suction lift up to 23 ft
  • Liquid temperature up to + 194°F
  • Environment temperature up to + 104°F

  Shipping Policy Return Policy

Weight 56