Stainless Steel, Self Priming, Pedrollo Multi-stage Pump, 1.5 HP, Single Phase

The 1.5 hp, 230 volt PJ30-15C16S self-priming multistage pump is perfect for situations that need higher pressure without a loss of water volume. The self priming ability allows them to lift water up to 29 feet and reach a flow up to 34 gpm. They can also produce up to 214 ft of head (92 PSI).

Specifics

• 1.5 HP
• 230 Volt
• Single Phase
• 60 hZ
• Stainless Steel

  Performance Range

  • Flow rate of up to 34 gpm
  • Head of up to 214 ft (92 psi)

  Installation and Use

  Plurijet self-priming pumps are designed for lifting water.  Their quiet running, reliability, and low power consumption makes them particularly suitable for domestic and civil use.

  • They are recommended for pumping clean water and liquids that are chemically non-aggressive to the materials from which the pump is made.
  • The pumps must be installed in enclosed places or at least protected against harsh weather.

  Construction

  • SUCTION AND DISCHARGE:* 1.25” x 1”
  • PUMP BODY: Stainless steel aisi 304, with threaded ports.
  • IMPELLER: Technopolymer. (Approved for drinking water)
  • MOTOR SHAFT: Stainless steel.
  • MECHANICAL SEAL: Ceramic and graphite.
  • MOTOR: The pumps are coupled to a carefully matched, high efficiency Pedrollo electric motor, which is quiet, closed, and externally ventilated (TEFC), suitable for continuous duty.
  • Thermal overload protector in single phase pumps.

  Limits Of Use

  • Manometric suction lift up to 29 ft
  • Liquid temperature up to + 104°F
  • Environment temperature up to + 104°F

  Shipping Policy Return Policy

Weight 58