Stainless Steel, Self Priming, Pedrollo Multi-stage Pump, 2 HP, 3 Phase

The 2 hp, 230-460 volt, three phase PJ50-20C16S self-priming multistage pump is perfect for situations that need higher pressure without a loss of water volume. The self priming ability allows them to lift water up to 29 feet and reach a flow up to 52 gpm.

Specifics

• 2 HP
• 230-460 Volts
• Three Phase
• 60 hZ

  Performance Range

  • Flow rate of up to 52 gpm
  • Head of up to 240 ft (103 psi)

  Installation and Use

  Plurijet self-priming pumps are designed for lifting water.  Their quiet running, reliability, and low power consumption makes them particularly suitable for domestic and civil use.

  • They are recommended for pumping clean water and liquids that are chemically non-aggressive to the materials from which the pump is made.
  • The pumps must be installed in enclosed places or at least protected against harsh weather.

  Construction

  • SUCTION AND DISCHARGE:* 1.25” x 1”
  • PUMP BODY: Stainless steel aisi 304, with threaded ports.
  • IMPELLER: Technopolymer. (Approved for drinking water)
  • MOTOR SHAFT: Stainless steel.
  • MECHANICAL SEAL: Ceramic and graphite.
  • MOTOR: The pumps are coupled to a carefully matched, high efficiency Pedrollo electric motor, which is quiet, closed, and externally ventilated (TEFC), suitable for continuous duty.
  • Thermal overload protector in single phase pumps.

  Limits Of Use

  • Manometric suction lift up to 29 ft
  • Liquid temperature up to + 104°F
  • Environment temperature up to + 104°F

  Shipping Policy Return Policy

Weight 61