Florida Pump Service carries all lines of pumps and parts. If you don't see what you're looking for contact us at 1.866.951.PUMP (7867) or by email and a service representative will gladly get back to you within 24 hours.

For emergency service calls in north Florida please call 904.269.0202. To request non-emergency service please email us.

Want to become a Pedrollo dealer? Florida Pump Service will gladly send you a dealer price list. Just send us an email with the products and quantities needed, and one of our representatives will send you a quote within 24 business hours.

Submersible Pumps

4 Inch monoblock submersible, 3/4 HP, 230 Volt, Single Phase, Model 4Block13G-07C16S

The 4 Inch, 3/4 hp, single phase Monoblock comes coupled with a high efficiency Pedrollo motor and 66 feet of flat submersible 2-wire cable attached. It is ready to go right out of the box, and is an overall friendly pump for installation. It is capable of pumping 18 GPM and reaching up to 260 feet (112 psi) of head.

4 Inch monoblock submersible, 1 HP, Single Phase, 230 Volt, Model 4Block25G-10

The 4 Inch, 1 hp, 230 volt, single phase Monoblock comes coupled with a high efficiency Pedrollo motor and 66 feet of flat submersible 2-wire cable attached. It is ready to go right out of the box, and is an overall friendly pump for installation. This 1 HP, 230 volt, 60 Hz monoblock is capable of pumping 32 GPM and reaching up to 200 feet (86 psi) of head.

4 Inch monoblock submersible, 1.5 HP, Single Phase, 230 Volt, Model 4Block25G-15

The 4 Inch, 1.5 hp, 230 volt, single phase Monoblock comes coupled with a high efficiency Pedrollo motor and 66 feet of flat submersible 2-wire cable attached. It is ready to go right out of the box, and is an overall friendly pump for installation. This 1.5 HP, 230 volt, 60 Hz monoblock is capable of pumping 32 GPM and reaching up to 300 feet (129 psi) of head.

4 Inch Sand-Resistant Submersible Pump with Franklin Motor and Control Box, 1 HP, 3-Wire with a ground, Single Phase, 230 Volt, Model 4SR25G-10HYD

This 4 inch 1 HP, 230 volt, single phase, Pedrollo submersible pump, with Franklin Electric motor, is capable of producing 32 GPM and a dynamic head of 198 feet, making it suitable for domestic, civil, and industrial applications.

4 Inch Sand-Resistant Submersible Pump with Franklin Motor and Control Box, 1.5 HP, 3-Wire with a ground, Single Phase, 230 Volt, Model 4SR25G-15HYD

The 4 inch, 1.5 HP, 230 volt, single phase Pedrollo submersible pump, with Franklin Electric motor, is capable of producing 32 GPM and a dynamic head of 298 feet, making it suitable for domestic, civil, and industrial applications.

4 Inch Sand-Resistant Submersible Pump with Franklin Motor and Control Box, 3 HP, 3-Wire with a ground, Single Phase, 230 Volt, Model 4SR45G-30HYD

The 4 inch, 3 HP, 230 volt, single phase Pedrollo submersible pump, with Franklin Electric motor, is capable of producing 58 GPM and a dynamic head of 238 feet, making it suitable for domestic, civil, and industrial applications.

4 Inch Sand-Resistant Submersible Pump with Franklin Motor and Control Box, 5 HP, 3-Wire with a ground, Single Phase, 230 Volt, Model 4SR75G-50HYD

The 4 inch, 5 HP, 230 volt, single phase Pedrollo submersible pump, with Franklin Electric motor, is capable of producing 81 GPM and a dynamic head of 298 feet, making it suitable for domestic, civil, and industrial applications.

Wastewater Pumps

Myers 1/2 HP, Effluent Pump

The CMV5A-11 Myers 1/2 HP Effluent pump is ideal for sewage and high capacity sump applications. Engineered for many years of maintenance-free operation.

Myers 4/10 HP, Residential Sewage Pump

This heavy duty 4/10 HP Myers submersible pump is great for residential sewage and effluent applications. The cast iron body makes it durable enough for almost any situation.

Pedrollo Vortex submersible for sewage water, High Head, 1/2 HP, Single Phase, 115 Volt

The 1/2 hp Pedrollo high head vortex submersible pump is perfect for the clearing of dirty water containing solids up to 2". The VXH-05A16S, can reach a flow up to 66 GPM and a head up to 28 feet.

Pedrollo Vortex submersible pump for sewage water, 1/2 HP, Single Phase, 115 Volt

The 1/2 hp Pedrollo vortex submersible pump is perfect for the clearing of dirty water containing solids up to 2". The VX-05A16S, can reach a flow up to 93 GPM and a head up to 18 feet.

Pedrollo Vortex submersible pump for sewage water, 3/4 HP, Single Phase, 115 Volt

The 3/4 hp Pedrollo vortex submersible pump is perfect for the clearing of dirty water containing solids up to 2". The VX-07A16S, can reach a flow up to 106 GPM and a head up to 23 feet.

Pedrollo Vortex submersible pump for sewage water, 1 HP, Single Phase, 230 Volt

The 1 hp Pedrollo vortex submersible pump is perfect for the clearing of dirty water containing solids up to 2". The VX-10C16S, can reach a flow up to 132 GPM and a head up to 34 feet.

Pedrollo Vortex Cast Iron Submersible Pump For Sewage Water, 1.5 HP, 230 Volt, Single Phase

The VXCL-15C16S is a submersible pump that is recommended for applications that might contain solids, such as sewage, wastewater, and sludge. It can pass solid bodies up to 3" and reach a flow rate of 185 GPM. The pump also has the ability to reach heads up to 42 feet.

Pedrollo Vortex Cast Iron Submersible Pump For Sewage Water, 2 HP, 230 Volt, Three Phase

The VXCL-20C36S is a submersible pump that is recommended for applications that might contain solids, such as sewage, wastewater, and sludge. It can pass solid bodies up to 3" and reach a flow rate of 224 GPM. The pump also has the ability to reach heads up to 52 feet.

Shallow Well Jet Pumps

Starite SNC, 1/2 Hp

The SNC, 1/2 HP, self-priming shallow well jet pump, provides good pressure for wells up to 25' deep. Great for home water systems and sprinkler systems.

Starite SND, 3/4 Hp.

The SNC, 3/4 HP, self-priming shallow well jet pump, provides good pressure for wells up to 25' deep. Great for home water systems and sprinkler systems.

Starite SNE, 1 Hp.

The SNC, 1 HP, self-priming shallow well jet pump, provides good pressure for wells up to 25' deep. Great for home water systems and sprinkler systems.

Cast Iron, 1/2 HP

The 1/2 HP Cast Iron Pedrollo Jet pump is ideal for water levels up to 25 feet. Reliable and efficient, the pump can produce up to 12 GPM, and can reach a maximum head of 166 feet (71 psi).

Cast Iron, 3/4 HP

The 3/4 HP Cast Iron Pedrollo Jet pump is ideal for water levels up to 25 feet. Reliable and efficient, the pump can produce up to 21 GPM, and can reach a maximum head of 155 feet (67 psi).

Cast Iron, 1 HP

The 1 HP Cast Iron Pedrollo Jet pump is ideal for water levels up to 25 feet. Reliable and efficient, the pump can produce up to 22 GPM, and a maximum head of 187 feet (80 psi).

Stainless Steel, 1/2 HP

The self-priming stainless steel 1/2 HP Pedrollo jet pump is ideal for lifting water up to 25 feet. It is capable of producing 12 Gallons per minute, and reaching a maximum head of 166 feet (72 psi).

Stainless Steel, 3/4 HP

The self-priming stainless steel 3/4 HP Pedrollo jet pump is ideal for lifting water up to 25 feet. It is capable of producing 21 gpm, and can reach a maximum head of 155 feet (67 psi).

Stainless Steel, 1 HP

The self-priming stainless steel 1 HP Pedrollo jet pump is ideal for lifting water up to 25 feet. It is capable of producing 22 Gallons per minute, and can reach a maximum head of 187 feet (79 psi).

Pressure Tanks

Flexcon H2 Pro WWT-20, 20 Gallon Pressure Tank

The Flexcon H2 Pro WWT-20, 20 gallon (42 gallon equivalent) Pressure Tank is perfect for maintaining your water pressure. The Flexcon's patented Control Action Diaphragm enhances performance while minimizing wear.

Flexcon H2 Pro WWT-30, 32 Gallon Pressure Tank

The Flexcon H2 Pro WWT-30, 32 gallon (82 gallon equivalent) Pressure Tank is perfect for maintaining your water pressure. This is the squat version of the WWT-35. The Flexcon's patented Control Action Diaphragm enhances performance while minimizing wear.

Flexcon H2 Pro WWT-35, 33.4 Gallon Pressure Tank

The Flexcon H2 Pro WWT-35, 33.4 gallon (82 gallon equivalent) Pressure Tank is perfect for maintaining your water pressure. The Flexcon's patented Control Action Diaphragm enhances performance while minimizing wear.

Flexcon H2 Pro WWT-45, 44 Gallon Pressure Tank

The Flexcon H2 Pro WWT-45, 44 gallon (120 gallon equivalent) Pressure Tank is perfect for maintaining your water pressure. The Flexcon's patented Control Action Diaphragm enhances performance while minimizing wear.

Flexcon H2 Pro WWT-80, 81 Gallon Pressure Tank

The Flexcon H2 Pro WWT-80, 81 gallon (220 gallon equivalent) Pressure Tank is perfect for maintaining your water pressure. The Flexcon's patented Control Action Diaphragm enhances performance while minimizing wear.

Turbine (Peripheral) Pumps

Bronze Lateral Suction, Pedrollo High Head Turbine Pump, 1/2 HP, Single Phase (PQm81-BS)

This Brass Pedrollo pump is best suited for industrial applications where high head and low flow are needed. It can reach a head of 296 feet (128 psi) and can produce a maximum flow of 4.8 gpm. It is small yet highly efficient.

Bronze Lateral Suction, Pedrollo Turbine Pump, 1/3 HP, Single Phase, 230 Volt (PQ 60 BZ)

The bronze 1/3 hp lateral suction turbine is perfect for a variety of industrial and commercial applications. The bronze body helps protect the pump from rust and oxidation. It is capable of reaching a flow rate of 10 gpm, and can also reach a maximum head of 131 feet (56 psi).

End Suction, Pedrollo Turbine Pump, Cast Iron, 1/3 HP, Single Phase (PKm 60)

The Pedrollo PK-0316S 1/3 hp, end suction, peripheral turbine pump, is suitable for domestic or industrial applications. It has a maximum water production of 10 GPM and 54 psi. Small yet efficient, the PK-0316S is a quality first pump, with a Pedrollo motor.

End Suction, Pedrollo Turbine Pump, Cast Iron, 1/3 HP, 3 Phase, 230/460 Volts (PK 60)

The Pedrollo PK-03H36S 1/3 hp, 230/460 volt, three phase, end suction, peripheral turbine pump, is suitable for domestic or industrial applications. It has a maximum water production of 10 GPM and 54 psi. Small yet efficient, the PK-03H36S is a quality first pump, with a Pedrollo motor.

End Suction, Pedrollo Turbine Pump, Cast Iron, 1/2 HP, Single Phase, 115 Volt (PKm 70)

The Pedrollo PKH-05A16S Single Phase, 1/2 hp, 115 volt, end suction, peripheral turbine pump, is suitable for domestic or industrial applications. It has a maximum water production of 13 GPM and 87 psi. Small yet efficient, the PKH-05A16S is a quality first pump, with a Pedrollo motor.

End Suction, Pedrollo Turbine Pump, Cast Iron, 1/2 HP, 3 Phase, 230/460 Volt (PK 70)

The Pedrollo PKH-05H36S Three Phase, 1/2 hp, end suction, peripheral turbine pump, is suitable for domestic or industrial applications. It has a maximum water production of 13 GPM and 87 psi. Small yet efficient, the PKH-05H36S is a quality first pump, with a Pedrollo motor.

End Suction, Pedrollo Turbine Pump, 1 HP, Single Phase, 230 Volt (PKm 100)

The Pedrollo PK-10C16S 1 hp, 230 volt, end suction, peripheral turbine pump, is suitable for domestic or industrial applications. It has a maximum water production of 18 GPM and 112 psi. Small yet efficient, the PK-10C16S is a quality first pump, with a Pedrollo motor.

End Suction, Pedrollo Turbine Pump, Cast Iron, 1 HP, 3 Phase, 230/460 Volt (PK 100)

The Pedrollo PK-10H36S 1 hp, Three Phase, 230/460 Volt, end suction, peripheral turbine pump, is suitable for domestic or industrial applications. It has a maximum water production of 18 GPM and 112 psi. Small yet efficient, the PK-10H36S is a quality first pump, with a Pedrollo motor.

End Suction, Pedrollo Turbine Pump, Cast Iron, 1.5 HP, 3 Phase, 230/460 Volt (PK 200)

The Pedrollo PK-15H36S 1.5 hp, Three Phase, 230/460 volt, end suction, peripheral turbine pump, is suitable for domestic or industrial applications. It has a maximum water production of 21 GPM and 121 psi. Small yet efficient, the PK-15H36S is a quality first pump, with a Pedrollo motor.

Lateral Suction, Pedrollo Turbine Pump, 1/3 HP, Single Phase, 115 Volt (PQAm 60)

The brass Pedrollo PQA-03A16S 1/3 hp, 115 volt, single phase, lateral suction, peripheral turbine pump, is perfect for industrial applications including cooling, conditioning and boiler feed. Small yet efficient, the PQA-03A16S is a quality first pump, with a Pedrollo motor.

Lateral Suction, Pedrollo Turbine Pump, 1/3 HP, 3 Phase, 230/460 Volt (PQA 60)

The Pedrollo PQA-03H36S 1/3 hp, three phase, lateral suction, peripheral turbine pump, is perfect for industrial applications including cooling, conditioning and boiler feed. The pump body, which is made of a high-performance technopolymer, allows the pump to handle varying environments. Small yet efficient, the PQA-03H36S is a quality first pump, with a Pedrollo motor.

Lateral Suction, Cast Iron, Pedrollo High Head Turbine Pump, 1/2 HP, Single Phase (PQm 81)

This Pedrollo pump is best suited for industrial applications where high head and low flow are needed. It can reach a head of 296 feet (128 psi) and can produce a maximum flow of 4.8 gpm. It is small yet highly efficient.

Lateral Suction, Pedrollo Turbine Pump, Cast Iron, 1/3 HP, Single Phase, 230 Volt (PQm 60)

With the ability to reach a maximum flow of 10.2 GPM, and the potential to reach 131 feet of head (56 psi), this Pedrollo pump is best suited for industrial applications that require precision power and flow without the size. It is small yet highly efficient.

Lateral Suction, Pedrollo Turbine Pump, Cast Iron, 1/3 HP, Three Phase, 230/460 Volt (PQ 60)

This 1/3 hp Pedrollo lateral suction peripheral turbine pump, is best suited for industrial applications that require precision power and flow without the size. It is small yet highly efficient. It can reach a maximum flow of 10.2 GPM, and also has the potential to reach 131 feet of head (56 psi)

Lateral Suction, Pedrollo Turbine Pump, Cast Iron, 3/4 HP, 3 Phase, 230/460 Volt (PQ 80)

The Pedrollo PQ-07H36S 3/4 hp, lateral suction, three phase, peripheral turbine pump, is best suited for industrial applications. It is small yet highly efficient. The PQ-07H36S comes standard with a Pedrollo motor.

Lateral Suction, Pedrollo Turbine Pump, Cast Iron, 2 HP, 3 Phase, 230/460 Volt (PQ 3000)

The PQH-20H36S 2 hp, 230/460 volt, three phase, Pedrollo peripheral pump is perfect for industrial uses. It comes coupled with a TEFC Pedrollo motor and a bronze impeller. It is capable of producing 13 gpm, and can reach a maximum of 590 feet of head.

Centrifugal Pumps

Pedrollo Centrifugal Pump, 1/2 HP, 3 Phase, 220/440 Volt, Model CP 600.

The CP 600, is a 1/2 hp, Pedrollo centrifugal pump. It is an amazing pump used in a variety of industrial and civil fields that require a small pump with great production. It has a flow rate up to 18 GPM and a maximum head of 65 ft.

Pedrollo Stainless Steel (AISI 304) Centrifugal Pump, 1 HP (Al-Red 135m)

The AR-10A16S is a completely Stainless Steel centrifugal pump. The 1 hp, 115 volt pump is capable of producing 47 GPM. It also has the ability to reach heads up to 105 feet. The fact that the entire wetted end is stainless steel, makes the pump ideal for situations requiring total hygiene and necessitate maximum corrosion resistance.

Pedrollo Stainless Steel (AISI 316) Centrifugal Pump, 3/4 HP, 3 Phase

The PNGA-07H36S is a complete AISI 316 Stainless Steel Pedrollo pump. The pump design with an open impeller allows for the passage of minor impurities, and makes the pump highly efficient in a variety of fields. It is capable of reaching a maximum flow up to 92 GPM. It can also reach a head up to 66 feet.

Pedrollo Centrifugal Pump, 3/4 HP, Single Phase, 115 Volt (CPm158/CPm620 )

This 3/4 hp Pedrollo centrifugal pump is a wonderful pump for industrial applications requiring a small pump with big power capabilities. It has a flow rate up to 23 GPM and a maximum head of 115 ft. The pump is coupled to a TEFC high efficiency Pedrollo Motor.

Pedrollo Centrifugal Pump, 1 HP, Single Phase, 230 Volt (CPm 650M)

The CP-10C16S is a 1 hp, 230 volt, single phase, 60 Hz Pedrollo centrifugal pump. It has a flow rate up to 42 GPM and a maximum head of 128 ft. The pump is coupled to a TEFC high efficiency Pedrollo Motor.

Pedrollo Centrifugal Pump, 1.5 HP, Single Phase, 230 Volt (CPm 190)

The CP-15C16S is a 1.5 hp, 230 volt, single phase, 60 Hz Pedrollo centrifugal pump. It has a flow rate up to 42 GPM and a maximum head of 141 ft. The pump is coupled to a TEFC high efficiency Pedrollo Motor.

Pedrollo Centrifugal Pump, 2 HP, 3 Phase, 230/460 Volt

The CP-20H36S is a 2 hp, 230-460 volt, three phase, 60 Hz Pedrollo centrifugal pump. It has a flow rate up to 42 GPM and a maximum head up to 168 ft. The pump is coupled to a TEFC high efficiency Pedrollo Motor.

Pedrollo Centrifugal Pump, 2 HP, Single Phase, 230 Volt

The CP-20C16S is a 2 hp, 230 volt, single phase, 60 Hz Pedrollo centrifugal pump. It has a flow rate up to 42 GPM and a maximum head up to 168 ft. The pump is coupled to a TEFC high efficiency Pedrollo Motor.

Pedrollo Close-Coupled Centrifugal Pump, 5 HP, Single Phase, 230 Volt

The CPH-50C16S is a 5 hp, 230 volt, single phase centrifugal pump. Able to reach a maximum flow of 119 gpm and top out at 171 feet of head, it is a powerful pump for civil and industrial situations that require a high volume of water at higher pressures.

Pedrollo Close-Coupled Centrifugal Pump, 5 HP, 3 Phase, 230/460 Volt

The CPH-50C16S is a 5 hp, 230-460 volt, three phase centrifugal pump. Able to reach a maximum flow of 119 gpm and top out at 171 feet of head, it is a powerful pump for civil and industrial situations that require a high volume of water at higher pressures.

Sump Pumps

Pedrollo Stainless Steel, Sump Pump for Clean or Slightly Dirty Water, 1/2 HP (D8)

The D-05A16S is a very reliable drainage submersible pump. It can be used with clear water, or slightly dirty water containing solids up to 3/8". The double seal feature protects the motor from leaks and the stainless steel motor casing helps fend off corrosion.

Pedrollo Stainless Steel, Sump Pump for Clean Water, 1/3 HP

High-quality submersible pumps in all stainless steel, for the drainage of clear water down to 1/2". Recommended for draining domestic water, rainwater, or emptying tanks and reservoirs. The 1/3 hp RX can pump up to 58 gpm, and can reach a head of 33 feet.

Pedrollo Vortex Sump Pump For Dirty Water, 1/3 HP

The TOP Vortex is a 1/3 hp vortex sump pump for dirty water. The vortex design and double seal motor allow for continuous duty and the passage of solid bodies up to 3/4". It is suitable for drainage applications that might contain non-aggressive particles.

Pedrollo Multi-stage Sump Pump For Clear Water, 1/2 HP

The TOP Multi is a 1/2 hp multi stage sump pump for clean water. The multi stages allow it to reach higher heads with a maximum limit of 98 feet (42 psi). It is suitable for drainage applications, and drawing from reservoirs with clear water.

Myers 1/3 HP, Residential Sump Pump

The F.E. Myers 1/3 HP S33 Submersible Sump Pump builds on the Myers tradition of innovation and quality. The 1/3 HP achieves a shut off head of 25 feet and a maximum flow of 32 GPM.

Myers 1/3 HP, Residential Sump Pump, With Vertical Float

The F.E. Myers 1/3 HP S33 Submersible Sump Pump builds on the Myers tradition of innovation and quality. The 1/3 HP achieves a shut off head of 25 feet and a maximum flow of 32 GPM.

Myers 1/3 HP, Residential Sump Pump (1/2 Inch Solids)

This 1/3 HP Myers Sump pump is designed for light demanding drainage applications. Maintenance-free operation and heavy duty reliability. It can pass 1/2" solids.

Multi-Stage Pumps

Cast Iron, Multi-stage Pedrollo Centrifugal, 1/2 HP

The 4CP-05A16S is a 1/2 hp, 115 volt, single phase, 60 hertz, multistage Pedrollo pump. It is particularly quiet with a high efficiency and low power consumption. It is perfect for domestic situations that need more pressure with higher flow.

Cast Iron, Multi-stage Pedrollo Centrifugal, 3/4 HP

The 4CP-07A16S is a 3/4 hp, 115 volt, single phase, 60 hertz, multistage Pedrollo pump. It is particularly quiet with a high efficiency and low power consumption. It is perfect for domestic situations that need more pressure with higher flow.

Stainless Steel, Self Priming, Multi-stage Pedrollo Pump, 1 HP, Single Phase

The 1 hp, 230 volt PJ20-10C16S self-priming multistage pump is perfect for situations that need higher pressure without a loss of water volume. The self priming ability allows them to lift water up to 29 feet and reach a flow up to 21 gpm.

Stainless Steel, Self Priming, Pedrollo Multi-stage Pump, 1.5 HP, Single Phase

The 1.5 hp, 230 volt PJ30-15C16S self-priming multistage pump is perfect for situations that need higher pressure without a loss of water volume. The self priming ability allows them to lift water up to 29 feet and reach a flow up to 34 gpm. They can also produce up to 214 ft of head (92 PSI).

Stainless Steel, Self Priming, Pedrollo Multi-stage Pump, 1.5 HP, Single Phase, Model Plurijet PJ50-15C16S

The 1.5 hp, 230 volt PJ50-15C16S self-priming multistage pump is perfect for situations that need higher pressure without a loss of water volume. The self priming ability allows them to lift water up to 29 feet and reach a flow up to 52 gpm.

Stainless Steel, Self Priming, Pedrollo Multi-stage Pump, 2 HP, 3 Phase

The 2 hp, 230-460 volt, three phase PJ50-20C16S self-priming multistage pump is perfect for situations that need higher pressure without a loss of water volume. The self priming ability allows them to lift water up to 29 feet and reach a flow up to 52 gpm.

Deep Well Jet Pumps

HMSE, 1 HP, Multi-Stage Deep Well Jet Pump

HMS Series Multi-Stage Jet Pumps are the highest performing pumps available in its category. The HMS Series Convertible Jets utilize the built-in regulator,offering easier priming and better range of performance from a complete line of Shallow Well, 4" Double Pipe, 2" and 3" Single Pipe Jet Packages. Pump may also be operated as a self-priming centrifugal (to 25 ft.) to provide a wide range of high pressure applications.

HMSF, 1.5 HP, Multi-Stage Deep Well Jet Pump

Starite, 1HP, Vertical, Multi-Stage, Deep Well Jet Pump

The SSJ Series Vertical Jet Pumpsare the industry standard deep well jet pumps for over-the-well“bolt-on” installations.

SPECIAL DEALS

Aermotor SD25A

This 1/4 hp Sump Pump is great for tight places where an average float might get caught. The sensor does not require anymore room than the pump itself takes up.

General Purpose, 2" Transfer Pump, Model 2G3A, 150 GPM

This 2" AMT commercial duty water pump is constructed of aluminum. Able to pass solids up to 1/2" thick, this self-priming pump is portable and lightweight, and comes stock with a 3.0 HP Briggs & Stratton engine. This pump is designed for use with nonflammable liquids compatible with pump component materials.

HYPRO 1573-SPC, 5 HP, Aluminum Transfer Pump

The HYPRO 1573-SPC self-priming aluminum, 5 HP Honda GC160 gas engine-driven transfer pump, 255 GPM at 43 PSI, 3″ x 3″ NPT ports, engine with oil alert. Comes with base, tubular bar frames, and suction strainer.

Pedrollo 1/3 HP Sump Pump for Clear Water

Pedrollo 1/3 Hp sump pump is great fro residential and commercial drainage applications.

Pool Pumps

Sta-Rite 3/4 HP Dura Glass Pool Pump, P2RA5D

Sta-Rite’s reputation for top quality equipment goes unchallenged in the pool industry. And they earned their reputation by gaining the confidence of professional builders, and ultimately satisfying pool owners. Each feature of these pumps has been engineered to answer the needs of today’s smart buyers: high efficiency, low maintenance and reliability.

Sta-Rite 1 HP Dura Glass Pool Pump, P2RA5E

Sta-Rite 1.5 HP Dura Glass Pool Pump, P2RA5F

PS 100, 5/8 Ceramic Mechanical Seal

5/8 Ceramic Mechanical Seal for pump.

Mechanical Seals

5/8 Ceramic Mechanical Seal PS 100

PS 100 Shaft Seal for Starite

PS 200, 5/8 Ceramic Mechanical Seal

5/8 Ceramic Mechanical Seal PS 200. Used in a variety of models.

PS 702, 5/8 Mechanical Seal

5/8 Ceramic Mechanical Seal PS 702 h1. Specifics * Shaft Size: 5/8 * Seal Outside Diameter (O.D): 1.185" * Seat Outsid

PS 877, 3/4 Mechanical Seal

PS 877 Shaft Seal for water pumps

Motors

A.O. Smith USQ 1052, 1/2 HP, Square Flange, Electric Motor,

Standard A.O. Smith Square Flanged 1/2 HP Electric motor. Compatible with a variety of pumps.

A.O. Smith USQ 1072, 3/4 HP, Square Flange, Electric Motor,

Standard A.O. Smith Square Flanged 3/4 HP Electric motor. Compatible with a variety of pumps.

A.O. Smith USQ 1102, 1 HP, Square Flange, Electric Motor,

Standard A.O. Smith Square Flanged 1 HP Electric motor. Compatible with a variety of pumps.

Self Priming Centrifugal

Myers QP 10, 1 HP Self Priming Centrifugal

The Quick Prime Self-Priming Centrifugal pump is designed for demanding where a lot of water is required over a long period of time. For lawn and garden sprinkling, car washing, or other big cleaning and maintenance jobs, it's built for one purpose only - continuous high performance service.

Tags