Cast Iron, 1/2 HP

The 1/2 HP Cast Iron Pedrollo Jet pump is ideal for water levels up to 25 feet. Reliable and efficient, the pump can produce up to 12 GPM, and can reach a maximum head of 166 feet (71 psi).

Specifics

• 1/2 HP
• 115 or 230 Volts (Must specify when ordering)
• Single Phase
• 60 HZ

  Performance Range

  • Flow rate up to 12 GPM
  • Maximum head of 166 ft (71 PSI)

  Use

  • JSW self-priming pumps are designed for suction lift and can be positioned above the water source, including applications with air entrained in the water.
  • Due to their reliability and low maintenance, they are recommended for domestic use, including water distribution (as part of a pressure set), garden irrigation, etc
  • They are recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made.
  • The pumps must be installed in enclosed places, or at least protected against inclement weather.
  • This pump is available in either 115 volts or 230 volts. Please specify when ordering.

  Construction

  • Pump comes with pressure gauge and Square D pressure switch. Both already attached and ready for operation
  • SUCTION AND DISCHARGE: 1” x 1”
  • PUMP BODY: Cast iron
  • EJECTOR UNION: “General Electric” Noryl technopolymer (approved for drinking water).
  • IMPELLER: Centrifugal radial flow in brass or “General Electric” Noryl technopolymer (approved for drinking water).
  • MOTOR SHAFT: Stainless steel.
  • MECHANICAL SEAL: Ceramic and graphite.
  • MOTOR: The pumps are coupled to a high efficiency PEDROLLO induction motor of suitable size, which is quiet, closed and externally ventilated, suitable for continuous duty.
  • The thermal cutout relay (motor protector) is incorporated in single phase motors.

  Shipping Policy Return Policy

Weight 23