4 Inch monoblock submersible, 1 HP, Single Phase, 230 Volt, Model 4Block18G-10

Model: 4Block18G-10C16S

The 4 Inch, 1 hp, 230 volt, single phase Monoblock coupled with a high efficiency Pedrollo motor. It is ready to go right out of the box, and is an overall friendly pump for installation. This 1 HP, 230 volt, 60 Hz monoblock is capable of pumping 26 GPM and reaching up to 240 feet (103 psi) of head.

h2 Specifics

• 4 Inch
• 1 HP
• Single Phase
• 230 Volt
• 60 Hz
• 2-wire

Performance Range

• Flow rate of up to 26 US gpm
• Dynamic head up to 240 feet (103 psi)

Pump Installation and Application

• This pump comes connected with a highly efficient Pedrollo motor. That, along with the 6 feet of power cable, limits the amount of work involved with installation, and creates an overall friendly installation process.

• Due to their high efficiency and reliability, they are recommended for domestic water supplies as part of a pressure system or for irrigation.

Construction

• DISCHARGE: 1.25 Inches

• DELIVERY BODY: Stainless steel AISI 304 with threaded port.
• CASE: Stainless steel AISI 304.
• IMPELLERS & DIFFUSERS: Technopolymer.
• DIFFUSER HOUSING: Stainless steel AISI 304.
• PUMP SHAFT: Stainless steel AISI 304.
• PUMP BEARINGS: Housing in special technopolymer with stainless steel AISI 316 shaft bushes, chrome oxide coated to resist sand.
• DRIVE COUPLING: Stainless steel AISI 316L.
• SCREWS AND CABLE COVER: Stainless steel AISI 304.
• MOTOR SHAFT: Stainless steel AISI 316.
• MOTOR: Submersible for continuous duty (dry rewindable).
• DOUBLE SEAL: mechanical seal ceramic – graphite – NBR with oil barrier chamber and inner lip seal to protect the seal in the event of dry running. Motor thermal protection built into the winding.

Limits Of Use

• Liquid Temperature up to +86 F
• Submersion depth up to 131 feet

Shipping Policy Return Policy

Weight 25