Home › Products › Submersible Pumps › 4 Inch monoblock submersible, 1 HP, Single Phase, 230 Volt, Model 4Block25G-10
Internet Special

4 Inch monoblock submersible, 1 HP, Single Phase, 230 Volt, Model 4Block25G-10

Model: 4Block25G-10C16S
List Price: $920.00 Internet Special
Price: $699.00

The 4 Inch, 1 hp, 230 volt, single phase Monoblock comes coupled with a high efficiency Pedrollo motor and 66 feet of flat submersible 2-wire cable attached. It is ready to go right out of the box, and is an overall friendly pump for installation. This 1 HP, 230 volt, 60 Hz monoblock is capable of pumping 32 GPM and reaching up to 200 feet (86 psi) of head.

h2 Specifics

  • 4 Inch
  • 1 HP
  • Single Phase
  • 230 Volt
  • 60 Hz
  • 7 Stages

    Performance Range Return Policy

    • Flow rate of up to 32 US gpm * Dynamic head up to 200 feet (86 psi)

    Pump Installation and Application

    • Pump comes coupled with a high efficiency Pedrollo motor and 66 feet of flat submersible 2-wire attached.
    • This pump comes connected with a highly efficient Pedrollo built motor. That, along with the 66 feet of power cable, limits the amount of work involved with installation, and creates an overall friendly installation process.
    • Due to their high efficiency and reliability, they are recommended for domestic water supplies as part of a pressure system or for irrigation.

    Construction

    • DISCHARGE: 1.25 Inches
    • This pump and motor comes with a 66 foot 2-wire flat cable attached
    • DELIVERY BODY: Stainless steel AISI 304 with threaded port.
    • CASE: Stainless steel AISI 304.
    • IMPELLERS & DIFFUSERS: Technopolymer.
    • DIFFUSER HOUSING: Stainless steel AISI 304.
    • PUMP SHAFT: Stainless steel AISI 304.
    • PUMP BEARINGS: Housing in special technopolymer with stainless steel AISI 316 shaft bushes, chrome oxide coated to resist sand.
    • DRIVE COUPLING: Stainless steel AISI 316L.
    • SCREWS AND CABLE COVER: Stainless steel AISI 304.
    • MOTOR SHAFT: Stainless steel AISI 316.
    • MOTOR: Submersible for continuous duty (dry rewindable). * DOUBLE SEAL: mechanical seal ceramic – graphite – NBR with oil barrier chamber and inner lip seal to protect the seal in the event of dry running. Motor thermal protection built into the winding.

    Limits Of Use

    • Liquid Temperature up to +86 F
    • Submersion depth up to 131 feet
    Shipping Policy

Weight 25

Pdf-icon

Size: 233.4 KB