Home › Products › Submersible Pumps › 4 Inch monoblock submersible, 3/4 HP, 230 Volt, Single Phase, Model 4Block13G-07C16S
Internet Special

4 Inch monoblock submersible, 3/4 HP, 230 Volt, Single Phase, Model 4Block13G-07C16S

Model: 4Block13G-07C16S
List Price: $804.00 Internet Special
Price: $589.00

The 4 Inch, 3/4 hp, single phase Monoblock comes coupled with a high efficiency Pedrollo motor and 66 feet of flat submersible 2-wire cable attached. It is ready to go right out of the box, and is an overall friendly pump for installation. It is capable of pumping 18 GPM and reaching up to 260 feet (112 psi) of head.

h2 Specifics

  • 4 Inch
  • 3/4 HP
  • Single Phase
  • 115 or 230 Volt (Please select when purchasing)
  • 60 Hz
  • 7 Stages

    Performance Range

    • Flow rate of up to 18 gpm
    • Dynamic head up to 260 feet (112 PSI)

    Pump Installation and Application

    • Pump comes coupled with a high efficiency Pedrollo motor and 66 feet of flat submersible 2-wire attached.
    • This pump comes connected with a highly efficient Pedrollo built motor. That, along with the 66 feet of power cable, limits the amount of work involved with installation, and creates an overall friendly installation process.
    • Due to their high efficiency and reliability, they are recommended for domestic water supplies as part of a pressure system or for irrigation.

    Construction

    • DISCHARGE: 1.25 Inches
    • This pump and motor comes with a 66 foot 2-wire flat cable attached
    • DELIVERY BODY: Stainless steel AISI 304 with threaded port.
    • CASE: Stainless steel AISI 304.
    • IMPELLERS & DIFFUSERS: Technopolymer.
    • DIFFUSER HOUSING: Stainless steel AISI 304.
    • PUMP SHAFT: Stainless steel AISI 304.
    • PUMP BEARINGS: Housing in special technopolymer with stainless steel AISI 316 shaft bushes, chrome oxide coated to resist sand.
    • DRIVE COUPLING: Stainless steel AISI 316L.
    • SCREWS AND CABLE COVER: Stainless steel AISI 304.
    • MOTOR SHAFT: Stainless steel AISI 316.
    • MOTOR: Submersible for continuous duty (dry rewindable).
    • DOUBLE SEAL: mechanical seal ceramic – graphite – NBR with oil barrier chamber and inner lip seal to protect the seal in the event of dry running. Motor thermal protection built into the winding.

    Limits Of Use

    • Liquid Temperature up to +86 F
    • Submersion depth up to 131 feet

    Shipping Policy Return Policy

Weight 22

4Block13G
4Block13G
Pdf-icon

Size: 233.4 KB
Specs and Literature