Pedrollo Stainless Steel, Sump Pump for Clean or Slightly Dirty Water, 1/2 HP (D8)

The D-05A16S is a very reliable drainage submersible pump. It can be used with clear water, or slightly dirty water containing solids up to 3/8". The double seal feature protects the motor from leaks and the stainless steel motor casing helps fend off corrosion.

Specifics

• 1/2 HP
• 115 Volt
• Single Phase
• 60 HZ
• Stainless Steel

  Range Of Performance

  • Flow rate up to 73 gpm
  • Head up to 39 feet (16 PSI)
  • Submersible to depths of 15 feet
  • Passage of solid bodies up to 3/8”
  • Drainage to 1/2” from the bottom

  Installation and Application

  • The Pedrollo D series is designed for drainage of clear or slightly dirty water with small solids.
  • They are recommended for a variety of domestic, civil, and professional use, including, but not limited to: Draining flooded cellars or garages, emptying swimming pools or tanks, and for disposing of non-sewage waste water.
  • The D series is outstanding in their reliability for fixed installations with automatic operation.

  Construction Characteristics

  • Discharge: 1 1/2”
  • Delivery Body: Cast Iron with threaded ports.
  • Suction Grid: Stainless steel AISI 304.
  • Impeller: Open type, in glass filled technopolymer.
  • Motor Casing: Stainless steel AISI 304.
  • Motor Shaft: Stainless steel EN 10088-3 – 1.4104.
  • Double Seal: Mechanical seal silicon carbide – NBR, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running.
  • Motor: Submersible asynchronous single-phase for continuous duty. Minimum immersion of 8.5” for continuous duty.

  Comes with a 15 foot Neoprene Power Cable and Float Switch.

  Shipping Policy Return Policy

Weight 26