Pedrollo Stainless Steel, Sump Pump for Clean Water, 1/3 HP

High-quality submersible pumps in all stainless steel, for the drainage of clear water down to 1/2". Recommended for draining domestic water, rainwater, or emptying tanks and reservoirs. The 1/3 hp RX can pump up to 58 gpm, and can reach a head of 33 feet.

Specifics

• 1/3 HP
• 115 Volt
• Single Phase
• 60 HZ
• Stainless Steel

  Range Of Performance

  • Flow rate up to 58 gpm
  • Head up to 33 feet (14 PSI)
  • Submersible to depths of 30 feet
  • Drainage to 1/2”
  • Solids up to 3/8”

  Installation and Application

  • RX pumps are suitable for draining clear water without abrasive particles.
  • The construction guarantees simple and safe operation due to the complete cooling of the motor by the pumped water, and the double seal design.
  • They are recommended for fixed installations, emergency draining of small flooded areas (basements, cellars, garages), and for draining collection traps.

  Construction Characteristics

  • Discharge: 1 1/4”
  • Body: Stainless steel AISI 304, with threaded port ISO 228/1.
  • Suction: Stainless steel AISI 304.
  • Impeller: Stainless steel AISI 304.
  • Motor Support: Stainless steel AISI 304.
  • Motor Shaft: Stainless steel EN 10088-3 – 1.4104.
  • Double Seal: Mechanical seal ceramic – graphite – NBR, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running.
  • Motor: Submersible asynchronous single-phase for continuous duty.

  Comes with a 15 foot Neoprene Power Cable and Float Switch.

  Shipping Policy Return Policy

Weight 13