Florida Pump Service carries all lines of pumps and parts. If you don't see what you're looking for contact us at 1.866.951.PUMP (7867) or by email and a service representative will gladly get back to you within 24 hours.
For emergency service calls in north Florida please call 904.269.0202. To request non-emergency service please email us.
Want to become a Pedrollo dealer? Florida Pump Service will gladly send you a dealer price list. Just send us an email with the products and quantities needed, and one of our representatives will send you a quote within 24 business hours.
Tags
vortex
vj_series
vertical_pump
vertical
venturi
turbine
trash
transfer
sump
submersibles
starite
stainless_steel
sn_series
sj_series
shallow_well_pumps
shallow_well
sewage
self_priming
seal_plate
seals
pq_series
pool
pk_series
pedrollo
parts
part
o_ring
oring
myers
multi-stage
motr_bracket
motors
mechanical_seal
mechanical
lateral_suction
js+_series
jet_pumps
jet_pump
jet
j+_series
irrigation
impeller
hms_series
high_head
goulds
gasket
end_suction
effluent
drainage
diffuser
diaphragm
deep_well
cp_series
close_coupled
centrifugal
casing
bronze
bolt
back_pressure_valve
aermotor
adapter
Wastewater Pumps
Pedrollo Vortex submersible pump for sewage water, 1/2 HP, Single Phase, 115 Volt
The 1/2 hp Pedrollo vortex submersible pump is perfect for the clearing of dirty water containing solids up to 2". The VX-05A16S, can reach a flow up to 93 GPM and a head up to 18 feet.
Pedrollo Vortex submersible pump for sewage water, 3/4 HP, Single Phase, 115 Volt
The 3/4 hp Pedrollo vortex submersible pump is perfect for the clearing of dirty water containing solids up to 2". The VX-07A16S, can reach a flow up to 106 GPM and a head up to 23 feet.
Pedrollo Vortex submersible pump for sewage water, 1 HP, Single Phase, 230 Volt
The 1 hp Pedrollo vortex submersible pump is perfect for the clearing of dirty water containing solids up to 2". The VX-10C16S, can reach a flow up to 132 GPM and a head up to 34 feet.
Shallow Well Jet Pumps
Stainless Steel, 1/2 HP
The self-priming stainless steel 1/2 HP Pedrollo jet pump is ideal for lifting water up to 25 feet. It is capable of producing 12 Gallons per minute, and reaching a maximum head of 166 feet (72 psi).
Stainless Steel, 3/4 HP
The self-priming stainless steel 3/4 HP Pedrollo jet pump is ideal for lifting water up to 25 feet. It is capable of producing 21 gpm, and can reach a maximum head of 155 feet (67 psi).
Stainless Steel, 1 HP
The self-priming stainless steel 1 HP Pedrollo jet pump is ideal for lifting water up to 25 feet. It is capable of producing 22 Gallons per minute, and can reach a maximum head of 187 feet (79 psi).
Sump Pumps
Pedrollo Stainless Steel, Sump Pump for Clean Water, 1/3 HP
High-quality submersible pumps in all stainless steel, for the drainage of clear water down to 1/2". Recommended for draining domestic water, rainwater, or emptying tanks and reservoirs. The 1/3 hp RX can pump up to 58 gpm, and can reach a head of 33 feet.
Multi-Stage Pumps
Stainless Steel, Self Priming, Multi-stage Pedrollo Pump, 1 HP, Single Phase
The 1 hp, 230 volt PJ20-10C16S self-priming multistage pump is perfect for situations that need higher pressure without a loss of water volume. The self priming ability allows them to lift water up to 29 feet and reach a flow up to 21 gpm.
Stainless Steel, Self Priming, Pedrollo Multi-stage Pump, 2 HP, 3 Phase
The 2 hp, 230-460 volt, three phase PJ50-20C16S self-priming multistage pump is perfect for situations that need higher pressure without a loss of water volume. The self priming ability allows them to lift water up to 29 feet and reach a flow up to 52 gpm.
Stainless Steel, Self Priming, Pedrollo Multi-stage Pump, 1.5 HP, Single Phase, Model Plurijet PJ50-15C16S
The 1.5 hp, 230 volt PJ50-15C16S self-priming multistage pump is perfect for situations that need higher pressure without a loss of water volume. The self priming ability allows them to lift water up to 29 feet and reach a flow up to 52 gpm.
Stainless Steel, Self Priming, Pedrollo Multi-stage Pump, 1.5 HP, Single Phase
The 1.5 hp, 230 volt PJ30-15C16S self-priming multistage pump is perfect for situations that need higher pressure without a loss of water volume. The self priming ability allows them to lift water up to 29 feet and reach a flow up to 34 gpm. They can also produce up to 214 ft of head (92 PSI).
Wastewater Pumps
Pedrollo Vortex submersible for sewage water, High Head, 1/2 HP, Single Phase, 115 Volt
The 1/2 hp Pedrollo high head vortex submersible pump is perfect for the clearing of dirty water containing solids up to 2". The VXH-05A16S, can reach a flow up to 66 GPM and a head up to 28 feet.
Centrifugal Pumps
Pedrollo Stainless Steel (AISI 304) Centrifugal Pump, 1 HP (Al-Red 135m)
The AR-10A16S is a completely Stainless Steel centrifugal pump. The 1 hp, 115 volt pump is capable of producing 47 GPM. It also has the ability to reach heads up to 105 feet. The fact that the entire wetted end is stainless steel, makes the pump ideal for situations requiring total hygiene and necessitate maximum corrosion resistance.
Pedrollo Stainless Steel (AISI 316) Centrifugal Pump, 3/4 HP, 3 Phase
The PNGA-07H36S is a complete AISI 316 Stainless Steel Pedrollo pump. The pump design with an open impeller allows for the passage of minor impurities, and makes the pump highly efficient in a variety of fields. It is capable of reaching a maximum flow up to 92 GPM. It can also reach a head up to 66 feet.
Sump Pumps
Pedrollo Stainless Steel, Sump Pump for Clean or Slightly Dirty Water, 1/2 HP (D8)
The D-05A16S is a very reliable drainage submersible pump. It can be used with clear water, or slightly dirty water containing solids up to 3/8". The double seal feature protects the motor from leaks and the stainless steel motor casing helps fend off corrosion.