Lateral Suction, Pedrollo Turbine Pump, Cast Iron, 1/3 HP, Single Phase, 230 Volt (PQm 60)

With the ability to reach a maximum flow of 10.2 GPM, and the potential to reach 131 feet of head (56 psi), this Pedrollo pump is best suited for industrial applications that require precision power and flow without the size. It is small yet highly efficient.

Specifics

• 1/3 HP
• 230 Volt
• Single Phase
• 60 HZ
• Lateral Suction

  Performance Range

  • Flow rate up to 10.2 GPM
  • Head up to 131 ft (56 psi)

  Use

  • They are recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive to the materials from which the pump is made.
  • The hydraulic characteristics of these pumps, together with their compactness, make them suitable for use in the industrial sector.
  • The pumps must be installed in enclosed places, or at least protected against inclement weather.

  Construction

  • Suction: 1”
  • Discharge: 1”
  • PUMP BODY: Cast iron, with threaded ports.
  • MOTOR BRACKET: Aluminum with brass insert; reduces starting difficulties due to seizure of the impeller after long periods of inactivity.
  • IMPELLER: Brass, of the type with radial peripheral vanes.
  • MOTOR SHAFT: Stainless steel
  • MECHANICAL SEAL: Ceramic – graphite – NBR.
  • ELECTRIC MOTOR: The pumps are close-coupled to a carefully matched Pedrollo electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty.

  Shipping Policy Return Policy

Weight 12